from devo-e.com

Well friends, lets get some parts and diagrams shall we? (please be aware that there is still more testing going on)

The following diagram has been made purely to make it as simple as possible for beginners and advanced users alike.


(Special thanks to JohnnyTk26 for drawing up the diagram)

Full Diagram:
http://devo-e.com/dvdhax/images/Diagram_New.jpg

Adapter Pinout
[X] [8] [6] [4] [2] [0]
[X] [9] [7] [5] [3] [1]

X = Dead Pins

Full Parts List:
- Capacitors - .o1 micro Farads (symbol looks like .01 uF) [any small value should work, it is just used to filter AC out of the line so a “true earth” ground is achived]

- Voltage regualtor- 1086V33

- Small wire andything around the 20-22 gauge should work

- A small PC board

- Some small heatshrink might come in handy.

- You will need a power connector from a orginal xbox, or you can make your own. The connector pin spacing on the power connector is 2mm.

Now, there are other ways to build this, but we felt for newbies and pros alike, the best middleground were the parts listed above. I have taken into consideration some suggested parts, and will be adding them soon, but as an actual page to this blog, not a post.